|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
APX9132 Hall Effect Micro Switch IC Features * * * * * Micro Power Operation for Battery Applications Chopper Stabilized Amplifier Independent of North or South Pole Magnet, Easy for Manufacture Small Size Package Lead Free and Green Devices Available (RoHS Compliant) General Description The APX9132, integrated circuit, is an ultra-sensitive, pole independent Hall-effect switch with a latched digital output. A 2.5 volt to 3.5 volt operation and an unique clocking s c h e m e r e d u c e t h e a ve r a g e o p e r a t i n g p o we r requirements, either a north or south pole of sufficient flux will turn the output on; in the absence of a magnetic field, the output is off. The polarity independence and minimal power requirement allow this device to be easily replaced reed switch for superior for signal conditioning. Advanced CMOS processing is used to take advantage of low-voltage and low-power requirements, SOT-23-3 package provided a optimized package for most applications. Applications * * * * Micro Switch Handheld Wireless Application Wake Up Switch Clamp Shell Type Application Switch Magnet Switch in Low Duty Cycle Applications Pin Configuration GND APX9132 VDD VOUT SOT-23-3 Ordering and Marking Information APX9132 Assembly Material Handling Code Temperature Range Package Code Package Code A : SOT-23-3 AT : TSOT-23-3 Temperature Range I : -40 to 85 oC Handling Code TR : Tape & Reel Assembly Material G : Halogen and Lead Free Device X - Date Code APX9132 A/AT: X32X Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020C for MSL classification at lead-free peak reflow temperature. ANPEC defines "Green" to mean lead-free (RoHS compliant) and halogen free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by weight). ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright (c) ANPEC Electronics Corp. Rev. A.4 - Apr., 2009 1 www.anpec.com.tw APX9132 Absolute Maximum Ratings Symbol VDD VOUT IOUT TJ TSTG Supply Voltage Output Voltage Output Current Junction Temperature Range Storage Temperature Range TA = 25C unless otherwise noted Rating 5 5 1 150 -65 to +150 Unit V V mA C C Parameter Note 1: Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Thermal Characteristics Symbol JA Parameter Junction-to-Ambient Resistance in Free Air (Note 2) SOT-23 TSOT-23 Power Dissipation, TA=25oC PD SOT-23 TSOT-23 0.385 0.364 W 260 275 Typical Value Unit C/W Note 2: JA is measured with the component mounted on a high effective thermal conductivity test board in free air. Electrical Characteristics Symbol VDD Characteristic Supply Voltage Range TA = 25C, VDD=3V unless otherwise noted APX9132 Test Conditions Min. Operating Average 2.5 VDD -0.4 Typ. 5 1.2 2 20 180 60 0.3 11 Max. 3.5 10 2 8 1.0 40 V A mA A A V mV s ms % kHz Unit IDD Supply Current Awake Sleep IOFF VOH VOL tawake tperiod d.c. fc Output Leakage Current Output High Voltage Output Low Voltage Wake up Time Period Duty Cycle Chopping Frequency VOUT=3.5V, BRPNCopyright (c) ANPEC Electronics Corp. Rev. A.4 - Apr., 2009 2 www.anpec.com.tw APX9132 Magnetic Characteristics Symbol BOPS Operate Points BOPN BRPS Release Points BRPN Bhys Hysteresis -40 -20 10 -10 G G -45 10 -30 20 -15 40 G G Characteristic TA = 25C, VDD=3V unless otherwise noted APX9132 Test Conditions Min. 15 Typ. 30 Max. 45 G Unit Copyright (c) ANPEC Electronics Corp. Rev. A.4 - Apr., 2009 3 www.anpec.com.tw APX9132 Typical Operating Characteristics Switching Points vs. Ambient Temperature 40 30 20 Switching Points (G) BOPS Switching Points vs. Supply Voltage 40 30 20 Switching Points (G) BOPS TA=25oC 10 0 -10 -20 -30 -40 -40 BRPS 10 0 -10 -20 -30 BRPS BRPN BRPN BOPN BOPN -40 -20 0 20 40 60 80 100 2.5 3 3.5 4 4.5 5 Ambient Temperature (C) Supply Voltage (V) Average Supply Current vs. Ambient Temperature 10 Average Supply Current (A) Average Supply Current vs.Supply Voltage 20 18 Average Supply Current (A) TA=25oC 8 16 14 12 10 8 6 4 2 0 2.5 3 3.5 4 4.5 5 6 4 2 0 -40 -20 0 20 40 60 80 100 Ambient Temperature (C) Supply Voltage (V) Copyright (c) ANPEC Electronics Corp. Rev. A.4 - Apr., 2009 4 www.anpec.com.tw APX9132 Typical Operating Characteristics (Cont.) Output Source Current vs. VDD-VOUT Voltage 5 VDD=5V Output Sink Current vs. Output Low Voltage 10 9 8 Output Sink Current (mA) VDD=4V Output Source Current (mA) 4 7 6 5 4 3 2 1 0 VDD=5V VDD=3V 3 VDD=4V 2 VDD=3V 1 0 0 0.2 0.4 0.6 0.8 1 0 0 0.2 0.4 0.6 0.8 1 Output Low Voltage (V) VDD-VOUT Voltage (V) Output Switch Waveform Output Switch Waveform Output Voltage (0.5V/div) VOUT (0.5V/div) Output Voltage (0.5V/div) VDD=3V CL=12pF VDD=3V CL=12pF VOUT (0.5V/div) Time (50s/div) Time (50s/div) Copyright (c) ANPEC Electronics Corp. Rev. A.4 - Apr., 2009 5 www.anpec.com.tw APX9132 Pin Description PIN NO. 1 2 3 NAME VDD VOUT GND Power Input When a magnetic field enters the hall element and exceeds the operate point BOPS (or less than BOPN) the output turns on (output is low). When the magnetic field is below the release point BRPS (or above BRPN), the output turns off (output is high). Ground Connection FUNCTION Block Diagram VDD Awake & Sleep Timing Logic Hall Plane Dynamic Offset Cancellation Latch Circuit VOUT Chopper Amplifier Hysteresis Control GND Typical Application Circuit VOUT APX9132 VDD + 2.5V-3.5V 0.1F - GND SOT-23 (Top View) Copyright (c) ANPEC Electronics Corp. Rev. A.4 - Apr., 2009 6 www.anpec.com.tw APX9132 Function Description Operation The output of APX9132 switches low (turn-on) when in presence of strong flux density facing the marked side of package exceeds the operate point BOPS (or is less than BOPN). After turn-on, the output is capable of sinking up to 1mA and the output voltage is low (turn-on). In absence of flux density below the release point BRPS (or increased above BRPN), the APX9132 output switches high (turns off). After turn-off, the output is capable of sourcing up to 1mA and the output voltage is high (turn-off). The difference in the magnetic operated and released point is the hysteresis (B hys) of the device. This built-in hysteresis allows clean switching of the output even in the presence of external mechanical bouncing vibration and electrical noise. OUTPUT OFF 5V MAX OUTPUT VOLTAGE BOPN BOPS BRPN 0 -B 0 BRPS OUTPUT ON +B MAGNETIC FLUX Copyright (c) ANPEC Electronics Corp. Rev. A.4 - Apr., 2009 7 www.anpec.com.tw APX9132 Application Information It is strongly recommended that an external bypass capacitor be connected (is close to the Hall sensor) between the supply and ground of the device to reduce both external noise and noise generated by the chopper-stabilization technique. This is especially true due to the relatively high impedance of battery supplies. Pole-independent The pole-independent sensing technique allows for operation with either a north or south pole magnet orientation, enhancing the manufacturability of the device. The state-of-the-art technology provides the same output polarity for either pole in presence. Awake & Sleep Internal awake & sleep timing block circuit activates the sensor for 180 s and deactivates it for the remainder of the period (60 ms). A short "awake" time allows for stabilization prior to the sensor sampling and data latching on the falling edge of the timing pulse. While in sleep cycle, the output is latched in its previous state. Chopper Stabilized Technique The chopper stabilized technique cancels the mismatching of the hall element, the amplifier offset voltage and temperature sensitive drift by the dynamic offset cancellation and switched capacitor technique. This technique produces devices have an extremely stable Hall output voltage, therefore, the magnetic switch points are stable. Copyright (c) ANPEC Electronics Corp. Rev. A.4 - Apr., 2009 8 www.anpec.com.tw APX9132 Package Information SOT-23-3 D e SEE VIEW A E1 E b e1 c 0.25 VIEW A SOT-23-3 INCHES MIN. MAX. 0.057 0.000 0.035 0.012 0.003 0.106 0.102 0.055 0.037 BSC 0.075 BSC 0.60 8 0.012 0 0.024 8 0.006 0.051 0.020 0.009 0.122 0.118 0.071 MAX. 1.45 0.15 1.30 0.50 0.22 3.10 3.00 1.80 A2 A A1 S Y M B O L A A1 A2 b c D E E1 e e1 L 0 MILLIMETERS MIN. 0.00 0.90 0.30 0.08 2.70 2.60 1.40 0.95 BSC 1.90 BSC 0.30 0 Note : Dimension D and E1 do not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil per side. Copyright (c) ANPEC Electronics Corp. Rev. A.4 - Apr., 2009 9 0 L GAUGE PLANE SEATING PLANE www.anpec.com.tw APX9132 Package Information TSOT-23-3 D e SEE VIEW A E1 b e1 E c A2 A 0.25 GAUGE PLANE SEATING PLANE L VIEW A TSOT-23-3 INCHES MIN. 0.030 0.001 0.028 0.012 0.003 0.106 0.102 0.055 0.037 BSC 0.075 BSC 0.60 8 0.012 0 0.024 8 MAX. 0.031 0.002 0.030 0.020 0.008 0.122 0.118 0.071 MAX. 0.80 0.05 0.75 0.50 0.20 3.10 3.00 1.80 S Y M B O L A A1 A2 b c D E E1 e e1 L 0 MILLIMETERS MIN. 0.75 0.03 0.70 0.30 0.08 2.70 2.60 1.40 0.95 BSC 1.90BSC 0.30 0 Note : Dimension D and E1 do not include mold flash, protrusions or gate burrs. Mold flash, protrusion or gate burrs shall not exceed 10 mil per side. Copyright (c) ANPEC Electronics Corp. Rev. A.4 - Apr., 2009 A1 10 www.anpec.com.tw APX9132 Carrier Tape & Reel Dimensions OD0 P0 P2 P1 A E1 F K0 B SECTION A-A T B0 A0 OD1 B A SECTION B-B d Application A 178.0O .00 2 H 50 MIN. P1 4.0O .10 0 H 50 MIN. P1 4.0O .10 0 H A T1 T1 8.4+2.00 -0.00 P2 2.0O .05 0 T1 8.4+2.00 -0.00 P2 2.0O .10 0 C 13.0+0.50 -0.20 D0 1.5+0.10 -0.00 C 13.0+0.50 -0.20 D0 1.5+0.10 -0.00 d 1.5 MIN. D1 1.0 MIN. d 1.5 MIN. D1 1.0 MIN. D 20.2 MIN. T 0.6+0.00 -0.40 D 20.2 MIN. T 0.6+0.00 -0.40 W 8.0O .30 0 A0 3.20O .20 0 W 8.0O .30 0 A0 3.20O .20 0 W E1 1.75O .10 0 B0 3.10O .20 0 E1 1.75O .10 0 B0 3.10O .20 0 F 3.5O .05 0 K0 1.50O .20 0 F 3.5O .05 0 K0 1.50O .20 0 SOT-23-3 P0 4.0O .10 0 Application A 178.0O .00 2 TSOT-23-3 P0 4.0O .10 0 Devices Per Unit Package Type SOT-23-3 TSOT-23-3 Unit Tape & Reel Tape & Reel Quantity 3000 3000 Copyright (c) ANPEC Electronics Corp. Rev. A.4 - Apr., 2009 11 www.anpec.com.tw APX9132 Taping Direction Information (T)SOT-23-3 USER DIRECTION OF FEED Classification Profile Copyright (c) ANPEC Electronics Corp. Rev. A.4 - Apr., 2009 12 www.anpec.com.tw APX9132 Classification Reflow Profiles Profile Feature Preheat & Soak Temperature min (Tsmin) Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) Average ramp-up rate (Tsmax to TP) Liquidous temperature (TL) Time at liquidous (tL) Peak (Tp)* package body Temperature Sn-Pb Eutectic Assembly 100 C 150 C 60-120 seconds 3 C/second max. 183 C 60-150 seconds See Classification Temp in table 1 20** seconds 6 C/second max. 6 minutes max. Pb-Free Assembly 150 C 200 C 60-120 seconds 3C/second max. 217 C 60-150 seconds See Classification Temp in table 2 30** seconds 6 C/second max. 8 minutes max. Time (tP)** within 5C of the specified classification temperature (Tc) Average ramp-down rate (Tp to Tsmax) Time 25C to peak temperature * Tolerance for peak profile Temperature (Tp) is defined as a supplier minimum and a user maximum. ** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum. Table 1. SnPb Eutectic Process - Classification Temperatures (Tc) Package Thickness <2.5 mm 2.5 mm 3 3 3 Volume mm <350 235 C 220 C Volume mm 350 220 C 220 C 3 Table 2. Pb-free Process - Classification Temperatures (Tc) Package Thickness <1.6 mm 1.6 mm - 2.5 mm 2.5 mm Volume mm <350 260 C 260 C 250 C Volume mm 350-2000 260 C 250 C 245 C Volume mm >2000 260 C 245 C 245 C 3 Reliability Test Program Test item SOLDERABILITY HOLT PCT TCT ESD Latch-Up Method JESD-22, B102 JESD-22, A108 JESD-22, A102 JESD-22, A104 MIL-STD-883-3015.7 JESD 78 Description 5 Sec, 245C 1000 Hrs, Bias @ 125C 168 Hrs, 100%RH, 2atm, 121C 500 Cycles, -65C~150C VHBMU2KV, VMMU200V 10ms, 1trU 100mA Copyright (c) ANPEC Electronics Corp. Rev. A.4 - Apr., 2009 13 www.anpec.com.tw APX9132 Customer Service Anpec Electronics Corp. Head Office : No.6, Dusing 1st Road, SBIP, Hsin-Chu, Taiwan Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 2F, No. 11, Lane 218, Sec 2 Jhongsing Rd., Sindian City, Taipei County 23146, Taiwan Tel : 886-2-2910-3838 Fax : 886-2-2917-3838 Copyright (c) ANPEC Electronics Corp. Rev. A.4 - Apr., 2009 14 www.anpec.com.tw |
Price & Availability of APX9132AI-TRG |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |